Merchandise

Hasbro's Latest Crowd-Funded HasLab Revealed: A 6" Scale Ecto-1!

At New York Comic-Con this morning, Hasbro revealed their latest crowd-funding project for the Plasma Series: an Ectomobile Anniversary edition.

Pre-order sales for the crowd funded project are up now. 12,000 total orders will be needed by December 2, 2024 for the project to go into production. You can get your order in here. More from Hasbro in their official press release below!

Ghostbusters Plasma Series Ectomobile (Anniversary Edition) [Base Model] 

(HASBRO | Retail Price: $324.99) 

 

Celebrate 40 frightfully funny years of Ghostbusters with the Ectomobile—one of the most iconic movie cars of all time! If the overall campaign is successfully backed, the base model offering will include: 

 

Ghostbusters Plasma Series 6-Inch-Scale Ecto-1 with Lights & Sounds (x1) 

1984 Ecto-1 Hubcaps (x4) 

Ghostbusters 1984 Ecto-1 Decal Sheet (x1) 

Removable, Rolling Gurney (x1) 

Ghostbusters Plasma Series Library Ghost Action Figure (x1) with Stand (x1), Library Book Stack Accessory (x1), and Library Book accessory (x1) 

Ghostbusters Plasma Series Slimer Action Figure (x1) with Stand (x1) 

 

This crowdfunded project, which includes both the base and deluxe models, will run from October 18, 2024, to 11:59pm ET on December 2, 2024, and requires 12,000 combined total (across Basic and Deluxe Models) backer orders to begin production. If successful, the project is estimated to ship around Fall 2025.  

 

Don’t let this Anniversary Ectomobile drive off and leave you behind—fund this project today and park the only 6-inch-scale Ecto-1 ever made, in your Ghostbusters collection!  

 

Ghostbusters Plasma Series Ectomobile (Anniversary Edition) [Deluxe Model] 

(HASBRO | Retail Price: $399.99) 

 

Celebrate 40 frightfully funny years of Ghostbusters, as well as 35 hilariously haunted years of Ghostbusters II, with the Ectomobile—one of the most iconic movie cars of all time! If the overall campaign is successfully backed, the deluxe model offering will include: 

 

Deluxe Model: 

Includes Base Model: 

o Ghostbusters Plasma Series 6-Inch-Scale Ecto-1 with Lights & Sounds (x1) 

o 1984 Ecto-1 Hubcaps (x4) 

o Removable Rolling Gurney (x1) 

o 1984 Ghostbusters Ecto-1 Decal Sheet (x1) 

o Ghostbusters Plasma Series Library Ghost Action Figure (x1) with Stand (x1), Library Book Stack Accessory (x1), and Library Book accessory (x1) 

o Ghostbusters Plasma Series Slimer Action Figure (x1) with Stand (x1) 

Plus: 

o Ghostbusters II Conversion Kit Ecto-1A Roof with Functioning Lights (x1) 

o Ecto-1A Red Rear Bumper with Ecto-1A License Plate (x1) 

o 1989 Ghostbusters II Ecto-1A Decal Sheet (x1) 

o Ghostbusters Plasma Series Ecto-Charger Pack Accessories (x2) 

o Ghostbusters Plasma Series Ecto-plasm Streams (x2) 

o 1989 Ecto-1A Hubcaps (x4) 

o Ghostbusters II Toaster Accessory (x1) 

o Ghostbusters II Hot Beverage Thermal Mug Accessory (x1) 

o Ghostbusters II Free-Balloon-for-the-Kids Accessory (x1) 

o Ghostbusters Plasma Series Proton Pack Accessories (x4) 

o Ghostbusters Plasma Series Proton Streams (x4) 

o Ghostbusters Plasma Series Ray Stantz (Ghostbusters II) Action Figure (x1) 

o Ghostbusters Plasma Series Winston Zeddemore (Ghostbusters II) Action Figure (x1) 

o Ghostbusters Plasma Series Egon Spengler (Ghostbusters II) Action Figure (x1) 

o Ghostbusters Plasma Series Peter Venkman (Ghostbusters II) Action Figure (x1) 

 

This crowdfunded project, which includes both the base and deluxe models, will run from October 18, 2024, to 11:59pm ET on December 2, 2024, and requires 12,000 combined total (across Basic and Deluxe Models) backer orders to begin production. If successful, the project is estimated to ship around Fall 2025.   

 

Don’t let this Anniversary Ectomobile drive off and leave you behind—fund this project today and park the only 6-inch-scale Ecto-1/Ecto-1A ever made, in your Ghostbusters collection!  

 

Two Iconic Movies, Two Anniversary Events, Two Ways to Commemorate 

 

2024 is an important year for the Ghostbusters franchise, seeing the release of Ghostbusters: Frozen Empire and celebrating not one but two milestone anniversaries: the 40th Anniversary of Ghostbusters and the 35th Anniversary of Ghostbusters II! We’d already saved the collecting world with the first-ever Ghostbusters HasLab, the Plasma Series Spengler’s Proton Pack (no longer available), and came back strong with an ambitious sequel known as the second-ever Ghostbusters HasLab, the Two in the Box Ghost Trap & P.K.E. Meter (no longer available).   

 

But we were at a cross-rip—er, a crossroads—regarding the third-ever Ghostbusters HasLab. How would we trap the perfect paranormal follow-up? Unfortunately, nobody could agree on any one idea. There was a lot of bickering, even more name calling, and believe it or not, no less than three atomic-weight-of-cobalt wedgies. At the end of the day, we just couldn’t believe that things had gotten so bad in the HasLab Lab that there was no way back. Because there were a few sparks of sweet humanity left in that burned-out workshop. We just had to figure out a way to mobilize it! 

 

We needed something no one had ever done before, something that would blow the doors off the competition, and something that would really get the fandom’s collective engine revving. We’re beyond proud to announce the first-ever 6-inch-scale Ectomobile ever. EVER! And with both a base and deluxe model available, you get to choose your ride! 

 

Everybody Can Relax… 

  

That’s right, we found the car, and boy is she a beaut! The Ectomobile is so much more than just an automobile—it’s an icon; ridiculously designed, ridiculously cool, and instantly recognizable. The Ecto not only drove onto the silver screen, but she also drove straight into our hearts. We only hope our Plasma Series Ectomobile will do the same! Measuring in at 22.5 inches long, the Ghostbusters Plasma Series Ectomobile (Anniversary Edition) is just shy of 2 feet long and comes with all the movie-accurate bells, whistles, and gadgets, die-hard fans expect.  

 

The HasLab Lab worked directly with our partners at GHOST CORPS to create the most authentic and movie-accurate 6-inch-scale Ectomobile possible. Our design team was even able to visit and photograph an actual Ecto, and boy howdy, did they get all up in that car’s business, as indicated by the eerily insane amount of detail included in this 6-inch-scale replica.  

 

VEHICLE DESIGN DETAILS: 

*Included In Deluxe Model Only  

 

Plasma Series 6-Inch-Scale Action Figure Compatibility 

Functioning Lights 

o Headlights (x4) 

o Front Bumper Strobe Lights (x2) 

o Parking Lights (x4) 

o Unity S6 Spotlight (x1) 

o Interior Dome Lights (x3) 

o Dashboard Light (x1) 

o Taillights (x4) 

o Reverse Lights (x2) 

o Removable Ecto-1A Amber Front Bumper Strobe Light* (x1) 

Removable Ecto-1 Roof Rack with Functioning Lights (x1) 

o Seek Light (x1) 

o Strobe Light (x1) 

o Force 3 XL Light Bar (x2) 

o Front Lights (x2) 

o Rear Lights (x2) 

Removable Ecto-1A Roof Rack with Functioning Lights* (x1) 

o Red Beacon Light (x1) 

o Strobe Light (x1) 

o Whelen Edge Light Bar (x1) 

o Force 4 XL Light Bar (x1) 

o Front Lights (x2) 

o Force 3 XL Light Bar (x1) 

o Rear Tank Lights (x2) 

Removable Dot-Matrix Display Decals* 

o GHOSTBUSTERS (x1) 

o WE’RE BACK (x2) 

Functioning Doors (x4) 

Functioning, Reversible Wheels (x4) 

Functioning Hood  

Highly Detailed Engine Sculpt 

Highly Detailed Undercarriage 

Highly Detailed Interior (Designed for Movie Accuracy) 

o Front 

§ 360-Degree Functioning Steering Wheel 

§ Dash-Mounted Speaker 

§ Dash-Mounted Scanner 

§ Illuminating Radio Face 

§ Heater 

§ Glove Box 

§ Ceiling-Mounted CB Radio with Handheld Microphone 

o Rear 

§ Jump Seat  

§ Fold-Down Jump Seat 

§ Phone with Handheld Receiver 

o Cargo 

§ Removable Oscilloscope/Guidance System Unit  

§ Removable Distribution Units  

§ Removable Processors  

· Powered by 4 AA Batteries (Not Included) 

· USBC Port for “Always On” Display Option 

 

FIRST-EVER PLASMA SERIES GHOST: THE LIBRARY GHOST 

The Library Ghost (aka the Gray Lady, Librarian Ghost, and Eleanor Twitty) 

Class IV. Anchored to the New York Public Library. 

 

The Library Ghost is the first-ever spirit the Ghostbusters encounter, and now she’s immortalized in 6-inch scale as one of the first-ever Plasma Series ghost action figures! Featuring 7 points of articulation and ethereal, movie-inspired deco and design, the librarian is ready to haunt your shelves! Includes library book accessory, stack of library books accessory, and stand. 

 

How did we not do this sooner? 

 

SECOND-EVER PLASMA SERIES GHOST: THE GREEN GHOST 

The Green Ghost (aka Slimer) 

Class V. Full Roaming Vapor. Formerly anchored to the Sedgewick Hotel. 

 

The Green Ghost—or Slimer, as he’s more commonly known—is arguably the most famous ghost in the Ghostbusters universe, and the first successfully busted specter! From pigging out on leftover room service to charging and sliming Venkman, this ugly little spud was an immediate fan favorite. Now, he’s finally making his gluttonous debut in the Plasma Series, featuring 4 points of articulation and classic Ghostbusters design and detail. Includes stand.  

 

THE GHOSTBUSTERS ARE BACK (IN THE PLASMA SERIES)! 

 

Yes, that’s right, Ghostbusters! They’re back with twice the know-how and twice the particle power to deal with all your supernatural elimination needs. So come, celebrate the grand re-opening with 4 Ghostbusters Plasma Series Ghostbusters II action figures (Deluxe Model only)! 

 

Back the Ectomobile (Deluxe Model) and you’ll receive all 4 Ghostbusters, featuring all-new head sculpts and wearing the highly sought-after charcoal jumpsuits! You’ll also receive 4 Proton Pack accessories and 4 Plasma Stream accessories, as well as 2 Ecto-Charger Pack accessories and 2 Ecto-plasm Stream accessories, so you can re-create favorite moments from Ghostbusters II. 

 

Additional Deluxe Model accessories include a toaster, Ghostbusters hot beverage thermal mug, and Ghostbusters balloon. 

 

“TWO WEEKS TO TULLY” EARLY BIRD SPECIAL 

  

We couldn’t celebrate the hilarious follow-up to Ghostbusters, the aptly titled Ghostbusters II, without including the unofficial fifth Ghostbuster! As a special bonus, if the Ghostbusters Plasma Series Ectomobile (Anniversary Edition) traps the minimum backer amount within the first 14 days of the campaign, all backers will receive a 6-inch Louis Tully (Ghostbuster) action figure! Yes, that means if the early bird special is unlocked in the first 2 weeks, EVERYONE that backs the project throughout the duration of the campaign will receive this awesome Ghostbusters action figure! That’s scary awesome. Includes Proton Pack (x1), Plasma Stream (x1), Ghost Trap (x1) and P.K.E. Meter (x1) accessories. 

 

A SUPERNATURAL CELEBRATION 

 

We here in the Ghostbusters HasLab Lab love this franchise just as much as you do. We’re not just labbies, after all, we’re fans. We grew up with these characters, we wanted to join the team, and their stories are irrevocably woven into the very fabric of our existence. And 40 and 35 years later, both Ghostbusters and Ghostbusters II remain very much woven into the fabric of pop culture. To say we’re honored to be a part of the amazing and inclusive legacy of Ghostbusters… well, that would be putting it mildly.  

 

Here's to 40 years of frights, delights, and saving the world, as well as 35 years of psychomagnotheric ecto-plasm, haunted paintings, and… well, saving the world! Back this project today and race to the next bust in style! 

 

Ghostbusters HasLab. Yes, we’re back. Again.  

 

 Ghostbusters TM & © 2024 Columbia Pictures Industries, Inc. All Rights Reserved. 

Cadillac and all related Emblems and vehicle body designs are General Motors Trademarks used under license to Hasbro, Inc.  HASBRO and all related logos and trademarks are trademarks of Hasbro, Inc. © 2024 Hasbro. 

Let's Build the Fanhome Ecto-1: Issue 30 (Stages 111 through 114)

Welcome to the next segment in our amazing Eaglemoss/Fanhome die-cast Ecto-1 build series. What began on the Ghostbusters Interdimensional Crossrip podcast continues here on the HQ website in a bit more detail. Want to build along with us? You can start from issue one (or if you started before Eaglemoss ghosted us all, you can also sign up to resume where you left off with Fanhome).

Last time on the show, we build Issue 29. You can check that out here. But this go-round, we’re diving into Issue 30, which really starts to put some of the finishing touches on the exterior of the Ecto and really bring it together.

Issue 30 has a few challenging steps, but still not the hardest among those (that distinction continues to belong to some of the initial engine building stages and for one particularly harrowing stage coming up in Issue 31. More on that in the next edition).

Stages 111, 112, and 113 will seem awfully familiar. Particularly if you’re saving up some shipments and building things in batches. These three stages are essentially the mirror of what was done in the previous issue for the Right Rear fin and reflector/lights. Refer back to our previous build blog for more on those and, well, just reverse it in your mind. A lot of the same challenges apply here to keep pieces in place while adhering them together with screws.

Once again, some painter’s tape really becomes your best friend, particularly as you’re trying to keep the wires in place behind the fins and the skirting (and to keep them attached to the small clips that are provided to wrangle a little). As more components of the car are permanently put into place, the wires do start to become a little less jumbled. But a little bit of easy to remove tape to the chassis of the car and/or a little wrap around some of the bundles will save you a world of headache.

Stage 114 is a great stage because it pretty much tops off the rear cargo area of the Ecto and, sans the roof rack gadgets and gak, gives you a pretty photogenic look at how the end product of your car is going to look!

Once again, wire wrangling ends up being one of the most difficult parts of this stage as you have to make sure that the wires for the lights are threaded into the small space just below the point where you’re about to place some chrome skirting. It takes a little bit of wiggling, but I was able to get the wires to stay in place as I snapped the skirting into place without tape this go-round.

It’s a bit unfortunate that I’ve gotten so used to flipping the car on its top to do work since, in the next issue, we’re about to start adding some of the roof rack lights and components. Which then means you need to very carefully place the car on its side when you’re doing work like this. Keen eyes will also note that I haven’t swapped out the passenger door for the fix that was received in the previous issue. At this point, reverse engineering to get the door off and back on might be a bit tricky and I’m still weighing just how much effort (and potential of breaking something) getting rid of that side-view mirror post is worth. Any thoughts? Let me know in the comments.

After you get the skirting on comes the fun part, attaching the rear license plate to the fender, then strapping that onto the back.

Once it’s on there, the rear end of the car is looking pretty close to done. You’ll see that some of the chrome trim that is applied with sticker glue is still peeling off. Basically all the points that I HAVEN’T dropped a little bit of Gorilla Glue onto are peeling up and sticking out. I’ve decided to wait until I’ve married the body of the car to the chassis before I start putting those little dabs of super glue on the trim and making sure they stop peeling, but it really is a nuisance. For all of the attention to detail and engineering on this awesome model, having those pieces just be metallic stickers that don’t permanently stick is a weird oversight. But easily remedied during a bit of clean up and polish when this is all said and done.

Lastly, in this issue, you receive the last component of the indicator arm that is going to finally allow you to affix the steering wheel onto the driver’s side column from way, way back in the day. Thank goodness I have one giant gallon-sized Ziplock that I kept all the small pieces that Eaglemoss wanted you to set aside for later (and that I didn’t lose said bag). Here’s the rub - the new indicator arm that is received, is pretty much identical to the one received previously with one exception, that it has a rubber spacer instead of being one full piece.

Don’t do as I did and put both of the indicator arms down and forget which is which because I had to cheat and go check out the amazing build happening at MyEcto1.com to remind myself which one was the new one and which one was the old one.

Once you swap out the indicator arm, it’s fairly easy to slot it onto the steering column and lock the wheel in place with a single screw. Then the end cap just snaps on there to cover up your work (another place that I feel might need just a little dab of Gorilla Glue to keep that from popping off at some point in the distant future).

After that, you’re all done and ready for the next issue!

Our thanks to the good folks at Fanhome for reviving the subscription build, sending us stages for review and for keeping the engine running for us all. If you’d like to start up your subscription, now is the time as they’re only offering new and continued subscriptions for a limited time… presumably because they’re dealing with the limited stock from the Eaglemoss days. So act now if you’re interested and happy building!

A New Wave of Hasbro/Kenner Ghostbusters Product Hits Shelves

After the ball dropped in Times Square and the ol’ yearly odometer clicked over to 2024, eagle-eye collectors started noticing new Ghostbusters toys hitting shelves, particularly at Target stores. Well, Hasbro has made it official, here’s all the offerings they’re sending to a store near you to coincide with the release of Ghostbusters: Frozen Empire, including another round of retro-release Real Ghostbusters Fright Features figures!

Ghostbusters Track & Trap Ecto-1

(Ages 4 and Up/ Approx. Retail Price: $29.99/ Available: Now)

The Ghostbusters are back, chasing down ghosts and ghouls through the streets of New York! Re-create favorite scenes from the entertainment with this Ghostbusters Track & Trap Ecto-1 toy car. Swing out the blaster seat and launch a projectile or deploy the rooftop drone trap to imagine chasing spooky specters up into the air. Includes a Fright Features Slimer toy accessory, featuring Ecto-Stretch Tech for rubbery, stretchable ghost play. This vehicle is compatible with the Fright Features 5-inch action figures each sold separately, subject to availability). Available now at participating retailers , including Target, Big Bad Toy Store and more.

Ghostbusters Zap & Blast Proton Blaster

(Ages 5 and Up/ Approx. Retail Price: $29.99/ Available: Now)

Many different ghosts haunt the world and with this Ghostbusters Zap & Blast Proton Blaster, kids can be ready for any unruly apparition! Gear up as an official member of the Ghostbusters with this proton blaster, featuring LED light effects and 20+ sound effects, inspired by the Ghostbusters entertainment. Blast any class apparition in normal mode or use the “Specter Wavelength” button in Ghost Getter mode, pull back on the barrel to charge-and-reveal a color-changing proton stream. Look for more Ghostbusters-inspired toys, including action figures, vehicles, role play toys, and more (each sold separately, subject to availability). Available now at participating retailers, including Target, Big Bad Toy Store and more.

Ghostbusters Squash & Squeeze Slimer

(Ages 4 and Up/ Approx. Retail Price: $29.99/ Available: Now)

Slimer, the mischievous green ghost from the Ghostbusters entertainment is back to haunt collections! This 7-inch Ghostbusters Squash & Squeeze Slimer interactive toy ghost features over 40 spooky sounds to discover with a jiggly, squishy texture that feels icky yet awesome to the touch. Fly, shake, or swing Slimer as he reacts with motion sounds. Press his tongue to hear munching sound effects, ghostly and ghastly burps and more. Look for more Ghostbusters-inspired toys, including action figures, vehicles, role play toys, and more (each sold separately, subject to availability). Available now at participating retailers.

Ghostbusters Fright Features 5-inch Figures

(Ages 4 and Up/ Approx. Retail Price: $9.99/ Available: Now) 

The Ghostbusters are officially back in business, chasing down ghosts and ghouls through the streets of New York! This Fright Features Callie Spengler, Gary Grooberson, Phoebe Spengler, and Trevor Spengler 5-inch figures features entertainment-inspired design and detail, 5 points of articulation, and comes with a Ghostbusters toy Proton Pack with Ghostbusters blaster wand accessory. Also included in this Ghostbusters figure set is a Fright Feature Possessor accessory featuring Ecto-Stretch Tech. This fun, rubbery, ghost easily stretches, so kids and collectors can pull it over the figure and imagine her possessed by a poltergeist. Look for more Ghostbusters-inspired toys, including action figures, vehicles, role play toys, and more (each sold separately, subject to availability). Available now at participating retailers, including Amazon, Big Bad Toy Store and more.

Ghostbusters Kenner Classics The Real Ghostbusters

(Ages 4 and Up/ Approx. Retail Price: $14.99/ Available: Now)

Join The Real Ghostbusters as they rid New York City of pesky poltergeists! Kenner Classics Ghostbusters toys are designed to replicate the original 1980s Ghostbusters figures, based on the animated series The Real Ghostbusters. Fans can relive the nostalgia with collectible packaging that features the original Kenner branding. Look for more Ghostbusters-inspired toys, including action figures, vehicles, role play toys, and more (each sold separately, subject to availability). Available now exclusively in-stores at Target and at other participating retailers beginning in April.

Hasbro's HasLab Returns - This Time with TWO in the Box!

After quite a bit of teasing over the past couple weeks, on 10/27 Hasbro revealed the big announcement it had been hyping: the next crowd-funded Ghostbusters HasLab in their series!

The super-successful Spengler Proton Pack was a tough act to follow, but this go-round Hasbro is offering two for the price of one - a replica Ghost Trap and accompanying PKE Meter to go with it! For $299.99 (US) you get both items, plus whatever stretch goals are accomplished in the funding period - which ends on December 11th. So if you want in on this, better act now before the holidays kick in and you forget!

Both items are incredibly cool. This was a quick and easy “Yes please!” for me. The Ghost Trap looks to improve upon the Matty Collector trap offered several years ago in a few places. And also improving on the previous Matty Collector release, the PKE Meter adds the Ghost Taser functionality and red handle button seen in Ghostbusters: Afterlife. Not only that, but Hasbro is touting that the PKE Meter will be a real, working EMF Meter to help you track down those decaying electrons that supernatural entities are known for.

If you’re interested, don’t delay - make sure you back the project sooner than later both so that you don’t miss out and also so that you can help unlock all the stretch goals, which include utility belt offerings, patches, and more!

Hasbro also offered some explosive surprises coming both with 40th Anniversary of the original Ghostbusters film hitting in 2024 and the new as-of-yet untitled Ghostbusters: Afterlife sequel scheduled for release in March.

Here’s the full press release from Hasbro with all the info fit to print:

Ghostbusters Plasma Series HasLab Two in the Box! Ghost Trap & P.K.E. Meter

(HASBRO/Ages 14 years and up/Crowdfunding price: $299.99/Estimated to ship in late Fall 2024)

*Limit of 5 per customer. Standard shipping and handling to the contiguous United States included for Pulse Premium Members. Shipping and handling charges will be calculated at the time of checkout for non-Pulse Premium Members.

 

A lot has happened since we saved the world with our first-ever HasLab—the Ghostbusters Plasma Series Spengler’s Proton Pack life-size replica (no longer available). That’s why, here at the Ghostbusters HasLab Lab, we’ve been working on something special for fans and collectors: the highly anticipated sequel to the smash-hit Hasbro Pulse Ghostbusters HasLab, the Ghostbusters HasLab 2!

The Ghostbusters Plasma Series has equipped fans with a stunning Neutrona Wand and a breathtaking Proton Pack, and now we’re pleased to announce that spooky specters and ghosts can run… but they can’t hide—not from the Plasma Series Two in the Box! P.K.E. Meter and Ghost Trap premium adult collectible set!

This crowdfunded project will run from October 27, 2023, to 11:59pm ET on December 11, 2023, and requires 10,000 backer orders to begin production. If the suspension, shocks, brakes, brake pads, steering box, transmission, and rear end hold up as we drive this campaign to the finish line, the project is estimated to ship in late Fall 2024.

Ghostbusters TM & © 2023 Columbia Pictures Industries, Inc. All Rights Reserved.

HASBRO and all related logos and trademarks are trademarks of Hasbro, Inc. © 2023 Hasbro.

 

THE PSYCHOKINETIC ENERGY METER (AKA THE P.K.E. METER)

It’s no secret Egon Spengler was a very hands-on, DIY kinda scientist, often cobbling together his hardware from common, everyday items, and the P.K.E. Meter is no different. Egon used an old electric shoe polisher for the bulk of this handheld piece of tech, which trades in footwear for phantasms, determining specter location and quantification. The P.K.E. Meter acts like a divining rod when near a spectral being, with a pair of motorized arms extending outward from the sides, embedded lights flashing in sync with detectable spectral frequencies.

Fans will be happy to know that not only have the HasLab Lab Lab Techs included classic P.K.E. Meter features, such as Ghost Detection Mode, but they’ve also included a very special upgrade. Yes, that’s right, the HasLab P.K.E. Meter 1:1-scale premium adult collectible features Egon Spengler’s personal upgrade from his time as the Dirt Farmer, in Summerville: Taser Mode! Taser Mode, if you’re unfamiliar, turns the P.K.E. Meter into a taser that forces an apparition to reveal itself… or explode in a burst of marshmallow goo, as we know from Podcast’s dealings with the mischievous Mini-Pufts in the Ecto-1.

 

THE GHOSTBUSTERS PLASMA SERIES P.K.E. METER

Scanned from the Prop

Innovative Real Life EMF Detection Mode

Multi-LED Display Panel

Motorized LED-Lined Wings

Entertainment-Inspired Sound Effects

Mode Slide Switch

Ghost Detection Mode

Low Ionization, High Ionization, and Mute Settings

Taser Mode (Spengler Upgrade) with Toggle Switch

Display Stand

 

THE GHOST TRAP

Needing something to contain and transport paranormal entities to a more permanent housing facility (namely the Ecto-Containment Unit), Ray Stantz and Egon Spengler designed the Ghost Trap. Consisting of a main chassis and a removable cartridge, the Ghost Trap has limited battery life and was never meant to accommodate ecto-plasmic beings for any extended period.

This 1:1-scale premium adult collectible features everything fans love about this vital piece of ghost-bustin’ gear, including the removable cartridge, high-powered LEDs, premium metal finishes, functioning diecast metal wheels for smooth deployment, and more! This thing is so gorgeous that ghosts will be throwing themselves at you just for a chance to get trapped within this highly detailed, premium collectible!

 

THE GHOSTBUSTERS PLASMA SERIES GHOST TRAP

Scanned from the Prop

Ghost Trap with Removable Cartridge

Working Activation Pedal

Working High-Powered Internal LEDs

Working Multicolored LEDs

Entertainment-Inspired Sound Effects

Functioning Trap Doors and Rumble Motor

Premium Metal Finishes

9-foot Pedal-to-Trap Connection Cable

Docking Station Display Stand

Functioning Diecast Metal Wheels for Remote Deployment

Ghostbusters to Ghostbusters 2 Aesthetic Conversion

Ghostbusters, Ghostbusters 2, and Ghostbusters: Afterlife Modes

 

WARNING: Do NOT look directly at the Ghost Trap’s energy field, when activated, as there exists the potential for stray muons in the body to be drawn out through the eyes, and with them, one’s eternal soul.

 

UNLOCK #1: THE SUPERNATURAL STARTUP UNLOCK

Beautiful, you’re hired. Welcome aboard. Here’s your Supernatural Startup Unlock!

If you want to suit up then you’re gonna have to study up, because the last thing you want is to be unprepared when in the presence of a nasty, focused nonterminal, repeating phantasm, believe you me, buster. Get to know your supernatural elimination equipment with the Supernatural Startup Unlock. Bust this unlock and you’ll receive a handy 18”x24” P.K.E. Meter and Ghost Trap blueprint poster, which, quite frankly, will look pretty boss displayed on your favorite wall.

Speaking of boss displays, you can really spruce up any joint with a few perfectly placed slaps. That’s why we’ve included some sick sticker designs, inspired by the Ghostbusters universe, including Ray’s Occult Books, Stay Puft Marshmallows, and more!

Think you know what else we have in store? Fancy yourself as an aspiring psychic? Then you’re in luck because you’re going to love testing the limits of your psychic abilities with a set of five 4.5”x7” ESP cards, inspired by Dr. Venkman, and updated with a Dr. Stantz flair. Oh, we also took out a third mortgage on the HasLab Lab to give these cards a premium linen-backed finish!

And if that’s not enough, you can slap a screen-accurate ‘84 No Ghost patch replica on your flight suit. Re-created to match the screen-used Ghostbusters patches from the original 1984 smash hit, this patch is the perfect addition to the shoulder of your suit.

12,000 backers bust the Supernatural Startup Unlock. We shouldn’t have to raise the dead to hit that number, but if we do, don’t worry, we handle this kind of thing all the time.

 

UNLOCK #2: THE SECURE RECEPTACLE GHOST TRAP UNLOCK

Face it, ghost-bustin’ is a very active job, boots on the ground and packs on the backs.

Sometimes a pesky paranormal pest will flee… straight through a wall. A good Ghostbuster will give pursuit, which means regaining lost ground, thanks to that slimy, supernatural shortcut. It’s not easy to run—or even jog—with a Proton Pack strapped to your back. Thankfully, your pack is secure; your Trap should be, too!

When hustling down a hallway to catch up to a fleeing phantasm, your Trap is going to be hanging onto your belt for dear life. You don’t want to meet up with your target only to discover your Trap fell off somewhere along the way. That won’t be an issue with the Secure Receptacle Ghost Trap Unlock, which comes complete with a secure holster, created with premium soft goods and real metal.

Oh, and we’re throwing in another Ghostbusters patch! That’s right, we’ve got our very own exclusive Ghostbusters HasLab patch you can slap on your suit, add to your patch collection, or trade with fellow busters!

15,000 backers trap the Secure Receptacle Ghost Trap Unlock, ensuring your Ghost Trap will stick to you like glue when on the paranormal prowl!

UNLOCK #3: THE PSYCHOKINETIC ENERGY DETECTION UNLOCK

Carrying the P.K.E. Meter around in the breast pocket of your lab coat isn’t gonna cut it when on a call. Besides, you’ll have suited up, and the zippered breast pockets of the flight suit are even less adequate for storing this delicate piece of homemade machinery. Looks like we’re going to need another holster! Designed with premium soft goods and real metal pieces, you’ll have peace of mind knowing your Psychokinetic Energy Meter is strapped snugly to your waist.

Need another patch? Good, because you’re getting another patch! You love patches, we love patches, and we want to share the love! Unlock the P.K.E. Meter holster and we’ll toss in an exclusive Mini-Puft No Ghost logo patch. Yep, the adorable image of a Mini-Puft caught in the red No symbol as seen after the end credits of 2021’s Ghostbusters: Afterlife comes to life in an exclusive patch!


18,000 backers to detect the Psychokinetic Energy Unlock, ensuring you have everything you need to take your Ghostbusters Plasma Series supernatural elimination equipment on all your calls!

Let's Build the Fanhome Ecto-1: Issue 29 (Stages 107 through 110)

The build is back!

When Eaglemoss went under just about a year ago in July, I feared the worst for my subscription Ecto-1 build. The kit was a whole lot of fun. And, if you followed along with our builds on the Ghostbusters Interdimensional Crossrip podcast, Chris and I had a great chat every time we would sit and work on our models. It was a double-whammy to have lost the flow of subscription kits and to lose that amazing time with Chris. It sure seemed like a lot of us were going to be stuck with half (or less) built Ecto-1 models.

Enter the good folks at Fanhome, who have taken over the licenses from Eaglemoss and resurrected the subscriptions from the dead. You can now sign up to start from issue one, or pick up from where you may have left off with Eaglemoss and continue via Fanhome. Fanhome has made it super easy to pick which issue you need to begin with and their intuitive website and responsive customer service have been a breath of fresh air.

With the podcast having switched to a more infrequent model, I’ve decided to detail my builds here on the news blog hopefully as reference for those who may need it or for a quick overview for those of you who may be on the fence about joining the club. The model is amazing in quality, and Fanhome gives you all the tools that you need (with a few expendable exceptions like painters tape that I’ll get into a bit later here). If you’re a lot like me and you need 20-30 minutes of downtime to just follow instructions and enter a zen meditative state, this build is for you. It’s just challenging enough to make it fun without being frustrating and, as the end results start to come together, having your own faithful 1:8 scale Ecto sitting on shelf sure is cool as hell.

Fanhome was kind enough to send over a new initial kit, which we’ll be building here on the HQ in the future, but for now - I’m going to pick up with where I left off a year ago, with Issue 29 (Stages 107 through 110), which comprises parts of the left and right rear wheel wells, and the ‘59 Miller Meteor Ecto-1’s iconic red tail fins.

WIth that, let’s crack into it, eh?

When Issue 29 arrived, I cackled with glee. Again, not thinking that this model would ever see completion, getting a box in the mail from Fanhome was a treat. Fanhome sends your monthly subscription in a brilliant purple package, another step beyond the generic mailers that would come from Eaglemoss. The company is really making your monthly shipments a grand event, and it’s pretty cool.

The first thing you’ll notice with this issue’s shipment is that it includes a revised passenger front door. Eaglemoss had mistakenly sent out their kits with a passenger mirror recessed in the initial stage and had been promising a fixed door to those who waited. When it didn’t look like Eaglemoss was coming back, I went ahead and built out the door that I had been sent and attached it to the body of the car — so I’m not entirely sure what to do. Pulling the door off at this point would be a pretty dramatic overhaul. But if I’m going to do it, now’s going to be the chance. I set the revised door aside and… I’ll make that decision later. Worst case, I have an Ecto with a stem for a passenger mirror. Ha!

The door conundrum aside, Stage 107 is pretty straight-forward and a relative breeze. The right rear fender “crown” has just two steps. But key on this one is that the chrome trim at the top of the fin doesn’t attach permanently at this point in the build, so you have to be careful not to lose both it and the rear trim. If you plow through the whole issue, it isn’t that big of a deal. But if you pace yourself out and only do one stage at a time, don’t forget it’s another piece you need to set aside for later. Pro-tip: I have a gallon-sized Ziplock that I set aside which contains only the parts that you’ve set aside for later (things like the steering wheel, etc.). If I know I’m going to have to come back to it later, into the Ziploc it goes.

Stage 108, the Right Rear Reflector and Outer Light Lens is also pretty straightforward and cruises by in a snap. The one thing to look out for on this stage is that the outside inner lens is a very small clear piece that isn’t seated in the tray too well when you open it. Chances are, it will pop out when you open up the package and blends into its surroundings with relative ease. At first, I thought my kit was missing the lens but later discovered it floating in the tray.

Also a curious last step to this stage, you have to replace two screws on either side of the car’s body with flatter machine screws than what were initially installed. I’m thinking this was a course correct for an error that may have popped up earlier in the build. And, when you attach the whole completed part to the body of the car, it actually makes a lot of sense that you need a good flush connection to hold all the plastic pieces against the body of the car.

Stage 109 is where the challenge of this particular issue comes into play. The rear fins have two main pieces with two horizontally mirroring rear tail lights. And, while the assembly of the pieces in this stage isn’t the hardest of steps (that continues to be building the engine at the beginning of the build), the wiring to get the LED wires and bulbs into the tail lights is a bit tricky. You have to pull one of the wires marked R off of your assembled body and wire it into this piece. It took me a bit of trial and error but I found that bending the wire behind the bulb lens slightly to fish the bulb into the housing was a good first step. Then, using the flat back of the supplied tweezers, you can almost shoehorn the bulb into place. The bulb doesn’t seem to go ALL the way into the lens, but it does pop in enough that it won’t shake around or fall out of place.

Once you finally get the two LED bulbs plugged into the lenses, it becomes a matter of snapping everything together into place and then attaching it to the wheel well. This is one of those fun partworks stages where you wish that you had three hands: one to hold all the pieces together, another to push further down the part, and a third hand to be turning the screws to affix everything together. In some instances, a little painter’s tape helps. Or a clamp. But with a couple goes, I was able to snap this all together without additional assistance. Only minor hand cramping. I’m old. It happens. Ha!

With the whole piece assembled, here’s the fun part: attaching it to the main body of the car. Again, after staring at my poor Ecto-1 sitting on the shelf missing wheel wells and these red fins, boy-oh-boy was this gratifying to finally do. It felt like, after a long winter working on a 10,000 piece puzzle, finding the ONE piece that had been missing for months and dropping it into place. There’s quite a bit of hardware that goes into keeping this piece in place, and you have to be careful to thread the wires exactly as they’re shown in the diagram - because they need to snake all the way around the rear of the car and through the left side wheel well also. This is where I definitely recommend a little bit of painters tape to help act as that third hand for you to keep things in place, both during this stage and after. I dropped a little piece of painter’s tape under the cargo door to keep the two wires in place for the next couple stages. Also be sure that you’re using the red tab to keep the wires under the cargo door. Tuck those guys under before you affix the IM screw down.

After quite a bit of screw turning (there’s at least seven IM screws and four NP screws to this stage), I had to flip the body over to take a look and admire. It’s been a long time coming darlin’. You deserve this moment.

The final stage to this issue is a cakewalk. You’re basically prepping to work on the other side of the rear of the car by attaching the skirting to the left rear fending. It’s a quick and easy step that you can set the finished product aside and enjoy the rest of the awesome magazine contents and drop the booklet into your binder. Hopefully after all this time, you still have your binder and the prongs to attach the magazines to them.

All in all, this was a whole lot of fun. After a year and counting of not sitting down to work on the car, I had to shake out a little rust - and realized how over-caffeinated I was with my shaky hands. I’m just so glad to be getting monthly shipments again to finish off this car and finally have what will become one of the crown-jewels in the GBHQ collection.

Our thanks to the good folks at Fanhome for reviving the subscription build, sending us stages for review and for keeping the engine running for us all. If you’d like to start up your subscription, now is the time as they’re only offering new and continued subscriptions for a limited time… presumably because they’re dealing with the limited stock from the Eaglemoss days. So act now if you’re interested and happy building!

Ghostbusters Day 2022 Recap

Sony Pictures and Ghost Corps put on quite a show last night, as a Marvel Studios-like presentation and screening kicked off the first annual (yes, they’ve got the drive to do this once a year) Ecto-Fest celebration. Cast and crew from the films, Sony Pictures employees, lucky fans, and members of the press were all on-hand for the festivities which included announcements, teases, and a booming outdoor encore screening of Ghostbusters: Afterlife.

The evening began with a wonderful behind the scenes featurette with b-roll footage of Ernie Hudson arriving at the Ladder 23 filming location in downtown Los Angeles to film the “end tag” scene from Afterlife.

The featurette served as an introduction for the man who needs no introduction, Ernie Hudson himself. Dressed in a power suit that would make the chairman of Zeddemore Industries proud, Hudson revealed that the Sony lot will forever remember Ivan Reitman by naming the street in which Ghost Corps and the Ecto-1 are parked “Ivan Reitman Way.” Hudson then teased that the future for Ghostbusters was in good hands and, “I’m not allowed to tell you much more than that, but rest assured, we have a lot of Ghostbusting ahead. I’ll just say, if need be, the flight suit still fits.”

With that, the floor was turned over to Hasbro where Jenny Whitlock unveiled a limited to two edition of an Ivan Reitman Plasma Series action figure. One of which will reside at Ghost Corps’ office in Culver City, and the second will be auctioned off for Children’s Hospital of Los Angeles at a later date.

Following that, Whitlock gave backers a glimpse at progress for the Spengler Proton Pack HasLab that was offered up for pre-sale crowd funding. The biggest reveals are that the Pack will weigh a mere 15-pounds and will be light on fans’ backs, includes real metal parts including the switches and Clippard Valves, and the Spengler Journal that was offered as an incentive will be double the page count than expected. A larger update is available on the Hasbro Pulse blog with photos of the most recent prototypes and more.

Next up was the head of Sony Pictures VR, Jake Zim (with special guest Logan Kim) who offered updates on their Meta VR experience and unveiled a new installation VR arcade called “Ghostbusters VR Academy,” which will be a two-story, two-part experience that allows players to train to be Ghostbusters and drive the Ecto-1 like a pro. The first part of the experience is a first-person perspective where you don a Proton Pack with a haptic feedback vest and capture ghosts in a team of four players. Following that, players head downstairs where they’re put in the driver’s seat for a simulated joyride of a new hover-prototype Ecto-1 through three levels of competition. The installation will be available at 400+ Hologate locations around the world later this year.

Zim and Kim yielded the floor to a filmed message from Dan Aykroyd himself, who taped a message from his family farmhouse. It is the same family farmhouse where his spiritualist great-grandfather served as the inspiration for Ghostbusters. Aykroyd teased that we’re all invested in the future of Ghostbusters, not just from an intellectual property and franchise perspective, but in the story that Afterlife opened up as well. We want to know what happened to Phoebe Spengler following the events at the Dirt Farm. We want to know what happened to the Ghostbusters in the time leading up to Afterlife and beyond. And with that, he was proud to announce the “spectral stewards and trusted keepers of the Cadillac keys” to the stage: Jason Reitman and Gil Kenan.

Reitman and Kenan had many announcements, all of which the running theme was inner-connectivity and a cohesive story that will fill in gaps, move the story into the future, and entertain Ghostbusters fans for years to come.

First up, the pair gave an update on the upcoming Ghostbusters: Spirits Unleashed console video game, which will allow players to compete either as Ghostbusters or as the ghosts themselves. Illfonic is working hard on the game for release later this year on consoles and PC.

Next, the first of the big reveals: Ghostbusters is returning to comics. Dark Horse Comics is the new license partner for Ghostbusters and Reitman and Kenan announced they are overseeing an in-canon mini-series that will be released at some point next year. A Variety article posted today says the Dark Horse series will bridge the gap between Afterlife and the upcoming sequel (more on that momentarily).

The duo then went on to announce the Ghostbusters animated feature film collaboration with Sony Pictures Animation has a creative team working hard on its development, and that the project was near and dear to the late Ivan Reitman’s heart. “This was a passion project of my father’s and it’s easy to understand why. The world of the unknown can only be properly explored through the limitless reach of animation,“ Jason Reitman told the crowd. Per Variety, Chris Prynoski (executive producer, “Beavis and Butt-Head Do the Universe”) and Jennifer Kluska (“Hotel Transylvania: Transformania”) are set to direct, with Brenda Hsueh (supervising producer, “Disjointed”) on board to write. Not much about the film was revealed but there were hints that new characters would be introduced.

More animation news came after that, with an extension of the announcement from this morning that Sony and Ghost Corps have partnered with Netflix to create a new animated Ghostbusters series. Reitman and Kenan assured fans that the new series will navigate an unexplored era of the Ghostbusters canon, which will be intriguing. “Between gaming, comics, television, and movies, we are going to tell the untold history of Ghostbusters while reaching into the future with characters you haven’t met from places you haven’t gone,” said Kenan on the world’s they are exploring in building out the universe.

Last, but certainly not least, the creative pair provided an update on the next live action Ghostbusters film that they are feverishly writing now. Reitman reminded fans that the codename for Ghostbusters: Afterlife was Rust City, a security title that became very clear when the film was released as both the geographical location of where the story took place, but also symbolic of the characters and world we knew. Well, now that the rust has been shaken, Reitman and Kenan gleefully teased that the security title they’ve been using for the new film is Firehouse. While we’re not clear on what the story will be, the two proudly announced that Afterlife ended with the Ecto-1 pulling into the firehouse bay and that’s where the next story will start: back in New York City. Though many news blogs and pundits my scoff at the announcement of a film’s code name, the announcement spoke volumes: Ghostbusters will be back in New York, back in the firehouse, and ready to bust some heads. In a spiritual sense, of course.

The evening was capped off with an outdoor screening of Ghostbusters: Afterlife in the cool Los Angeles air, with booming sound and a rowdy audience cheering and engaged throughout.

If this is the first of many Ecto-Fests to come, one can only imagine the scope and announcements and reveals that may be in store June of 2023. Until then, we let our imaginations run free and hang on tight for the future. It’s going to be a wild ride.

Hands-On with Hasbro's Latest Offerings

Etajj2mUUAEtEir.jpg

Our friends at Hasbro were kind enough to send along three items from their latest wave of 2021 offerings: the Kenner Retro Ghostpopper, Playskool Heroes Stay-Puft Marshmallow Man, and the revised edition of the Transformers mash-up Ectotron! All three are fantastic items for kids and collectors alike. Below are a few of our thoughts, and make sure to tune into this week’s episode of The Crossrip where Troy and Chris will chat through their thoughts in video and audio podcasting form!

Ghostpopper

A blast from the past as one of the few Real Ghostbusters Kenner items that I had as a kid (I had the proton pack, trap, Ghostpopper, and Ghost-Zappers to call my Ghostbusting arsenal back in the day). Currently a Wal-Mart exclusive, this reissued popper is almost identical to the one offered in the late 1980’s with a few key differences. Immediately noticeable is the blue coloration of the body of the thrower. While not entirely out of the ordinary for the Kenner line (most if not all of the throwers and weapons were the same distinctive blue), the original Ghostpopper had a black matte body. Most likely this change had to be made due to new restrictions on toy companies not being able to make weapons a color that could be mistaken for real. Also a change due to the times, lots and lots of warnings and advisories printed on the bottom of the body of the thrower. The packaging is a near one-to-one replica of the original box, again with more safety messaging (and the child model is now sporting safety glasses). I seem to remember the original Kenner box having three targets, where the reissue only has Stay-Puft and Slimer cardboard cutouts. Aside from that, it is 100% the exact toy that you may have had as a kid and perfect for the next generation of Ghostbuster to begin their journey as well.

Playskool Heroes Stay-Puft

More for the younger set, but an outstanding sculpt and a great likeness of Puft - which for some reason is always tough to nail down. Being Playskool, nice to have a toy for those aged 3-and-up but with my little one found that the button on the top was just a little too difficult for a three-year-old’s finger to chunk down and change the face. But, ever-resourceful, she quickly figured out she could just spin the face and that was a whole lot easier and just as much fun.

IMG_9189.jpeg
IMG_9190.jpeg

Articulation at the hip of Puft gives him a bit of a wobble that simulates walking and kind of turns him in to a bobblehead/hula doll, which is a fun touch as well. In fact, there’s a surprising amount of articulation on the figure, including arms and hands that allow a wide variety of poses.

Transformers Ectotron (Ghostbusters Afterlife Edition)

If you weren’t fortunate to pick up the original issue of the Ecto-1 Transformer in 2019, now is your chance to pick up the figure on a blister cardback with a few differences that make it Ghostbusters Afterlife specific. A Target exclusive, Ectotron is pretty much the same with a few rust details and slightly modified Ecto-Goggles, a translucent Muncher figure is now included along side the Slimer figure that was originally offered. And, still in the package the item is a great display piece just as its predecessor.

Check out a hands-on of all-three on this week’s Crossrip by hitting the link here or watching the video below!

Our thanks again to Hasbro for providing these for review, here’s more information on each of the three items, all available for purchase now!

Transformers: Generations – Transformers Collaborative: Ghostbusters: Afterlife Ecto-1 Ectotron

(Ages 8 and Up / Approx. Retail Price: $59.99 / Available: January 1, 2021)

Worlds collide in this TRANSFORMERS-Ghostbusters mash-up as the iconic Ecto-1 Cadillac from the Ghostbusters: Afterlife movie converts to a TRANSFORMERS robot – the ECTO-1 ECTOTRON! He ain’t afraid of no ghosts. ECTOTRON stands at 7 inches tall, converts between Ecto-1 and robot mode in 22 steps, comes with a Proton Pack, blaster accessories, the classic 1984 Slimer ghost figure, the new Ghostbusters: Afterlife Muncher ghost figure, and an issue number 1 of the Transformers/Ghostbusters Ghosts of Cybertron comic book from IDW Publishing, featuring an exclusive cover. The figure also features an updated head sculpt, including updated Ecto-Goggles, inspired by Ghostbusters: Afterlife and afterlife Tech Specs showing the capabilities of ECTOTRON, including strength, speed, and bust-abilty.

TRANSFORMERS robots have always been MORE THAN MEETS THE EYE, but now, through the TRANSFORMERS Collaborative, fans can experience these larger than life characters as they team-up, mash-up, and meet up with other characters, teams and people who share this same special quality. Available exclusively at Target.

GHOSTBUSTERS KENNER CLASSICS GHOSTPOPPER

(Ages 8 and Up / Approx. Retail Price: $19.99 / Available: January 1, 2021)

Poltergeist popping action is back with the GHOSTBUSTERS Kenner Classics Ghostpopper from Hasbro! Inspired by the classic blaster from Kenner, this retro Ghostpopper is a must have for any Ghostbusters fan and features original Kenner deco and package art inspired by the iconic look from the 80s. Comes with six soft foam Ghostpops and three cut-out ghost targets. Available exclusively at Walmart.

GHOSTBUSTERS PSA STAY PUFT MARSHMALLOW MAN

(Ages 3 and Up / Approx. Retail Price: $14.99 / Available: January 1, 2021)

Inspired by the Ghostbusters entertainment franchise, this GHOSTBUSTERS Stay Puft Marshmallow Man figure brings mega fun to exciting adventures! Sized right for small hands, this bulky 10.7-inch figure features articulation and multiple preschool-perfect facial expressions. Kids can press the button on Stay Puft’s head to change his expression and imagine fun stories! Available at most major retailers nationwide.

The Most Detailed LEGO Ecto-1 Ever is Coming November 15th!

LEGO and Ghostbusters.com announced an all-new, highly-detailed Ecto-1 kit inspired by Ghostbusters Afterlife today! Here’s all the news that’s fit to print along with the full press release via LEGO.

The latest LEGO set features:

  • All of the roof gear from the original film, including a moving ghost sniffer and radome. Both movements are activated by driving the car’s rear wheels

  • A trap door in the rear that can be activated by a lever on the roof to release a remote-controlled ghost trap

  • Rear passenger door opens to reveal a scissor-seat mechanism that extends and rotates the rear passenger seat out of the car using a trigger on the roof of the car

  • A 5-module steering wheel, corner brick with box, curved windscreen and pop out seat like in the movie

LEGO has announced an all-new Ecto-1 Creator kit coming November 15th, based on the upcoming film Ghostbusters Afterlife! Here's photos, discussion, and a lo...

The new LEGO Ghostbusters ECTO-1 is the most detailed LEGO brick recreation of the car ever produced and is the latest in a collection of film-based LEGO model building kits for adults who love building to relax and escape from the stresses of life. This set features two brand new LEGO brick elements including a new 6x14 curved windscreen and a new 5 module steering wheel.

Talking about the creation of the LEGO Ghostbusters Ecto-1, the set’s LEGO designer, Michael Psiaki said “I love creating LEGO vehicles, and having previously designed the LEGO James Bond Aston Martin DB5, I loved the challenge of working on the ECTO-1. This is the largest and most detailed version of this car that we have ever created. It is crammed full of authentic features and easter eggs that I’m excited for builders to discover as they put this model together.

The LEGO Ghostbusters ECTO-1 contains 2,352 pieces and measures over 8” (22.5cm) high, 18” (47cm) long and 6” (16.5cm) wide. The set will be available from 15th November ahead of the release of the latest film in the Ghostbusters Franchise, Ghostbusters: Afterlife that launches in 2021.

LEGO Ghostbusters ECTO-1™ will be available directly via LEGO.com and LEGO Stores from November 15th.

For more information and to order yours, check out the official LEGO website!

Hasbro PulseCon Unveils Two New Toy Products

This past weekend was Hasbro’s big virtual PulseCon toy event, a two-day livestream extravaganza that included their biggest brands and some rocking performances, particularly from Jack Black and Kyle Gass and the rest of Tenacious D.

Amid the festivities were two big product reveals. Both of which went up for pre-order on Saturday 9/26 (and in the case of the Ecto, sold out almost immediately).

Here’s all the info on the new products!

GHOSTBUSTERS KENNER CLASSICS GHOSTPOPPER

(Ages 8 and Up / Approx. Retail Price: $19.99 / Available: January 1, 2021)

Poltergeist popping action is back with the GHOSTBUSTERS Kenner Classics Ghostpopper from Hasbro! Inspired by the classic blaster from Kenner, this retro Ghostpopper is a must have for any Ghostbusters fan and features original Kenner deco and package art inspired by the iconic look from the 80s. Comes with six soft foam Ghostpops and three cut-out Ghost Targets. Available exclusively at Walmart.

GHOSTBUSTERS PLASMA SERIES ECTO-1

(Ages 14 and Up / Approx. Retail Price: $49.99 / Available: January 1, 2021)

Commemorate the next chapter in the Ghostbusters story, GHOSTBUSTERS: Afterlife, with the GHOSTBUSTERS PLASMA SERIES ECTO-1 1/18th-scale collectible of the iconic Ecto-1 vehicle from Hasbro. Featured in the all-new GHOSTBUSTERS: Afterlife movie, this collectible features premium deco with incredible detailing inspired by the updated look of the new Ecto-1 as seen in the 2021 movie. The GHOSTBUSTERS PLASMA SERIES ECTO-1 collectible also features opening doors, movable pieces, and more features inspired by the movie. Available exclusively at Target.

As for the PulseCon event itself, you can hear Troy’s thoughts on this week’s episode of the Crossrip podcast, but here’s how the run of the show ended up going.

Part 1: Classic Ghostbusters

Panelists: Ernie Hudson, Hasbro Ghostbusters Brand Team

We’ll begin by celebrating the iconic 1984 film. Tune in for ghostly surprises, classic toy news, and a visit from a very special guest: Ernie Hudson, otherwise known as Winston Zeddemore from Ghostbusters! Get ready to hear him answer your fan questions!

Part 2: The Making of Kenner The Real Ghostbusters Toys

Panelists: Mark Boudreaux, Hasbro Ghostbusters Brand Team

We’ll continue our journey through the 80’s with an inside look at the making of the Real Ghostbusters toys from original Kenner toy designer, Mark Boudreaux. Next, you’ll see behind the scenes of sculpting with Dave. Finally, meet the Hasbro team that relaunched the Kenner Real Ghostbusters toys in 2020. Hear about how they answered the call to bring this beloved toy line back for the fans and be the first to see the next Kenner Real Ghostbusters toy to hit shelves!

Part 3: Ghostbusters Afterlife

Panelists: Jason Reitman, Hasbro Ghostbusters Brand Team

We’ll end our celebration with a nod to the future… the new Ghostbusters Afterlife feature film, coming to theaters in March 2021. Academy Award-nominated, Golden Globe-winning filmmaker Jason Reitman, director of Ghostbusters Afterlife, will take you on a tour of the Ecto-1 that was used in the new film. He’ll end his tour with an exciting reveal! You’ll then hear from the Hasbro team about the next toy inspired by the Ghostbusters Afterlife film to hit shelves!

A fun event to reach out to the fans during this stay at home pandemic to be sure. Safe to assume this is only the beginning of awesome merch to come from Hasbro given all that was seen at the New York International Toy Fair, and all that’s still to be revealed when Ghostbusters Afterlife hits theaters in 2021!

Hands On with the Spengler Neutrona Wand

With thanks to our friends from Hasbro for sending one along, Troy of the Interdimensional Crossrip podcast has a hands-on unboxing video of the amazing Spengler Neutrona Wand being sold via Hasbro Pulse, Big Bad Toy Store, GameStop, and Entertainment Earth!

We’re in the process of revisiting and relaunching our YouTube channel and our listeners mentioned they would love to see a hands-on/unboxing video of the particle thrower when we received it. Ask and we listen!

So here it is: our first thoughts on the brand new role-playing toy from Hasbro.

Troy from the Ghostbusters Interdimensional Crossrip podcast gets his hands on Hasbro's new Spengler Neutrona Wand from the upcoming film Ghostbusters Afterl...

Tune in next Monday when Chris and Troy also discuss the thrower together on the podcast, and be sure to listen to today’s episode of the Crossrip for all of the latest announcements and news from Hasbro PulseCon, including the pre-order launch of the 1:18th scale Ghostbusters Afterlife Ecto-1 from Target, and the retro Real Ghostbusters GhostPopper reissue at Walmart!

Get Ready for PulseCon 2020 - Hasbro's First Livestream Virtual Event

Screen Shot 2020-08-31 at 8.55.04 AM (2).png
Screen Shot 2020-08-31 at 8.54.41 AM (2).png

Hasbro has announced a live virtual event on September 25th and 26th where announcements across all its product lines, including Ghostbusters, will be made. The event follows in the footsteps of DC’s Fandome event providing targeted and focused convention experiences to a larger audience.

At the same time as the event, the exclusive “Tully’s Terrible Night” Plasma Series set will go on sale in the US & Canada via the Hasbro Pulse site.

More information on programming and when the Ghostbusters section of the virtual convention are to come, but until then here is the full press release from Hasbro:

HASBRO ANNOUNCES 2-DAY VIRTUAL EVENT “HASBRO PULSECON”

– THE ULTIMATE POP CULTURE CELEBRATION FOR FANS

 

Hasbro PulseCon Promises Front Row Access via Livestream to Hasbro’s Iconic Fan Brands, Music and Entertainment September 25-26, 2020; Only on the Hasbro Pulse YouTube Channel

 

PAWTUCKET, RI – August 31st, 2020 – Hasbro, Inc. (NASDAQ:HAS) today announced the first-ever Hasbro PulseCon, a 2-day virtual event that gives fans unprecedented access to their favorite Hasbro brands, music & entertainment. Taking place on September 25-26, 2020 exclusively on the Hasbro Pulse YouTube Channel and hosted by SYFY Wire on-air correspondent, writer, and producer, Jackie Jennings, Hasbro PulseCon promises fans in the US and Canada a front row seat to panels, talent appearances, brand reveals, product giveaways and more; connecting consumers to their favorite brands in an immersive, one-of-a-kind setting that, along with the eOne portfolio, will bring fans the best in entertainment, music, and toys. Announcements for new innovations and product reveals will take place for brands including Dungeons & DragonsG.I. JoeMagic: The GatheringPower RangersTransformers as well as premiere partner brands MarvelStar Wars™, Ghostbusters, and more.

PulseCon delivers the experience and connection of conventions for free and right from the comforts of fans’ homes. Highlights from the virtual event will consist of live unboxings, over 50 new product reveals and pre-orders, coveted Hasbro PulseCon exclusive merchandise, livestream panels featuring celebrities and audience Q&A, and surprise experiHasbro ences. “To be a part of this new virtual experience that celebrates fan culture and incorporates so many different iconic entertainment properties is truly a thrilling opportunity and I can’t wait for fans to check it out,” says Jackie Jennings, Hasbro PulseCon host.

“We are constantly impressed by our fan community and their unwavering passion for Hasbro brands. The Hasbro Pulse community was built with them in mind, and we’re excited to take fan-first engagement with our Pulse platform even deeper,” says Eric Nyman, Chief Consumer Officer, Hasbro. “We’re looking forward to celebrating the fans, providing community connection at a time where everyone needs it most, and ultimately delivering a peek behind the curtain on their favorite brands in a way only Hasbro can.”

 

Fans will also be able to get their hands on Hasbro PulseCon exclusive items, available only at Hasbro PulseCon in the US & Canada, including:

·        Ghostbusters Plasma Series Tully’s Terrible Night (Ages 4 and Up / Approx. Retail Price: $49.99 / Available: September 2020)

·        G.I. Joe Classified Series Snake Supreme Cobra Commander Action Figure (Ages 4 and Up / Approx. Retail Price: $29.99 / Available: September 2020)

·        Power Rangers Lightning Collection Mighty Morphin Lord Drakkon Evo III Figure (Ages 4 and Up / Approx. Retail Price: $49.99 / Available: September 2020)

·        Transformers: Generations War for Cybertron Trilogy: Quintesson Pit of Judgement 5-Pack (Ages 8 and Up / Approx. Retail Price: $69.99 / Available: September 2020)

·        Marvel Legends Series 6-Inch Hellfire Club Collection

(Ages 4 years and up / Approx. Retail Price: $79.99 / Available: September 2020)

·        Marvel Legends Series 6-Inch X-Men Marvel’s Logan & Charles Xavier Figure 2-Pack

(Ages 14 years and up / Approx. Retail Price: $49.99 / Available: September 2020)

·        Star Wars: The Vintage Collection Star Wars: The Clone Wars 501st Legion ARC Troopers Figure 3-Pack (Ages 4 years and up / Approx. Retail Price: $49.99 / Available: September 2020)

·        Star Wars: The Black Series Heroes of Endor Figure Set

(Ages 4 years and up / Approx. Retail Price: $109.99 / Available: September 2020)

·        Star Wars: The Black Series 6-Inch-Scale Hoth Wampa Figure

(Ages 4 years and up / Approx. Retail Price: $29.99 / Available: September 2020)

Additional details and scheduling will be announced soon. To stay up to date, fans can follow @HasbroPulse on Instagram and visit HasbroPulseCon.com for more details.

Hasbro's Ghostbusters Plasma Series Line Continues with the Keymaster(s)

Hasbro, the new official action figure licensor for Ghostbusters for the foreseeable future, announced the next figure offering from their Hasbro Pulse “Plasma Series” line-up: Louis Tully and a Terror Dog (presumably Vinz Clortho) in “Tully’s Terrible Night!”

The figure joins Ray Stantz, Peter Venkman, Egon Spengler, Winston Zeddemore, Dana Barrett, and Gozer in the 6” scale figure line (already available via the Hasbro Pulse website and other retailers including Target and Amazon). And not only shows Hasbro’s commitment to continuing the line, but also that there’s more on the way even with the current global pandemic.

Also in the Plasma Series line, and still up for pre-order in September is Spengler’s Neutrona Wand from the upcoming Ghostbusters: Afterlife film releasing in March of next year. As of now, the pre-orders for this awesome role-playing/prop replica appear to be on-time and shipping as planned.

Tully’s Terrible Night comes with a suggested retail price of $49.99 and ships in September. More from the press release below!

GHOSTBUSTERS PLASMA SERIES TULLY’S TERRIBLE NIGHT
(Ages 4 and Up / Approx. Retail Price: $49.99 / Available: September 2020)

The premium, collectible Ghostbusters figure fans have been waiting for is here with the GHOSTBUSTERS Plasma Series Tully’s Terrible Night two-pack from Hasbro. Inspired by the original Ghostbusters movies, the 6-inch scale Louis Tully and Terror Dog action figures feature premium detail across multiple points of articulation, movie-inspired accessories, and photorealistic actor likenesses. Included with the Plasma Series Tully’s Terrible Night two-pack is a helmet accessory that makes a great addition to any Ghostbusters Collection.

Kids and collectors alike can imagine slimy struggles and eerie ecto-encounters from the Ghostbusters Universe with figures from the Ghostbusters Plasma Series. When ghastly ghouls and spooky specters come looking to paint the town dead, the Ghostbusters are ready to answer the call! Available at HasbroPulse.com in September 2020.

Ghostbusters Toys Are Coming Home to Hasbro

Hasbro_4c_no_R.png

Just in time for Jason Reitman’s new Ghostbusters film in 2020, Hasbro will be returning to the property that found Kenner Products success during the time of The Real Ghostbusters in the late 1980’s and will be the global master toy licensee for Ghostbusters moving forward. From 1986 to 1991, the Kenner Real Ghostbusters line was a best seller for the company. Kenner was purchased by Hasbro in 1991, around the same time the toy line came to a close.

Additionally, Hasbro has announced an ambitious and praise-worthy initiative to eliminate plastics from their packaging beginning in 2020 to assist in global efforts of conservation and sustainability.

The full press-release from Hasbro is below:

SONY PICTURES CONSUMER PRODUCTS TAPS HASBRO AS GLOBAL MASTER TOY LICENSEE FOR GHOSTBUSTERS™

New Product Line Launches in 2020

PAWTUCKET, R.I. AND LOS ANGELES – AUG. 21, 2019 – Today, Sony Pictures Consumer Products announced that Hasbro, Inc. (NASDAQ:HAS), a global play and entertainment company, has been named the master toy licensee for Ghostbusters worldwide. Under the terms of the agreement, Hasbro will create a wide variety of toys inspired by the franchise and its entertainment properties globally designed to appeal to both fans of the original franchise, and a new generation of Ghostbusters around the world. Hasbro’s Ghostbusters line will be available in 2020, aligning with the promotion of the highly anticipated new Ghostbusters movie that is slated for Summer 2020 in the U.S.

The upcoming product line marks a return to the Ghostbusters franchise by Hasbro. From 1986 to 1991, Kenner, which is now part of Hasbro, created and marketed The Real Ghostbusters toy line, with many of the original developers from Kenner still working with Hasbro. More recently, Hasbro collaborated with Sony Pictures to create the Transformers Generations Collaborative: Ghostbusters Mash-Up Ecto-1 Ectotron which is currently available for pre-order exclusively at GameStop and HasbroPulse.com. Additionally, a Transformers / Ghostbusters crossover comic series is now available from IDW. These collaborations honor both brands’ 35th anniversaries this year.

“Ghostbusters is an iconic and beloved franchise and we are excited and honored to return to the brand as the global master toy licensee and bring new product to the next generation of fans,” said Tom Warner, Senior Vice President, Hasbro. “Drawing on Hasbro’s proprietary insights and culture of innovation, we are working closely with Sony Pictures Consumer Products to create a dynamic new toy line that we can’t wait to share with fans around the world.”

“As we build up to release our new Ghostbusters film next year, it was a natural choice to work with Hasbro to develop an all-new line of toys that not only celebrates the new film but also brings us back to the roots of the original film and toy line,” said Jamie Stevens, Executive Vice President, Sony Pictures Consumer Products. “Hasbro has a proven track record of working with well-known IP to make a variety of high-quality toys and figures that appeal to people of all ages and we are excited to leverage this expertise to bring new product experiences to Ghostbusters fans around the world.”

Get Ready for the Ultimate Ghostbusters Fan Fest in 2019!

ghostbusters_FanFest.jpg

Getting a jump on Ghostbusters Day 2018 announcements and celebrations, Wizard World and Ghost Corps announced today their plans for next year. June 8th and 9th, 2019 they're once again opening the doors to the Sony Pictures lot for a Ghostbusters convention in celebration of the original film's 35th anniversary, and Ghostbusters II's 30th anniversary. More information including how to get tickets and programming will surely be coming soon, but in the meantime here is a full press release with all we know so far.

Wizard World Teams With Sony Pictures and Ghost Corps on Ghostbusters Fan Fest Presented by Wizard World, June 8-9, 2019, Celebrating Iconic Film's 35th Anniversary

Year-long Countdown Begins Today At Wizard World Comic Con Columbus With Free Single- Day Admission, 'Ghostbusters'-Themed Programs This Weekend; Fan Fest To Be Held On Sony Pictures Studio Lot Featuring 'Ghostbusters' Creators, Talent and Crew; Event Continues IP Collaboration With Sony

CULVER CITY, California, June 7, 2018 /PRNewswire/ -- In anticipation of Ghostbusters Day tomorrow, the anniversary of the classic comedy which released 34 years ago on June 8, 1984, Wizard World, Sony Pictures and Ghost Corps have teamed up to announce an extraordinary live event, the Ghostbusters Fan Fest presented by Wizard World, to be held June 8-9, 2019 at Ghost Corps headquarters on the famed Sony Pictures Studio Lot in Culver City, Calif. Wizard World (OTCBB: WIZD), which produces the largest touring pop culture convention series, will produce the Ghostbusters Fan Fest.

Ghostbusters Fan Fest presented by Wizard World will be the ultimate celebration of the film, which starred Bill Murray, Dan Aykroyd, Sigourney Weaver, Harold Ramis, Rick Moranis, and Ernie Hudson and was directed by Ivan Reitman and written by Dan Aykroyd and Harold Ramis. For the 35th anniversary, fans will participate in exclusive panels, meet the Ghostbusters creators, talent and crew and experience Ghostbusters augmented reality and virtual reality games.

The celebration is officially ON at Wizard World Comic Con Columbus this weekend, with any fan cosplaying in Ghostbusters attire receiving a single-day admission to the event, by visiting the Special Guest Registration booth and showing off his/her Ghostbusters attire. Attendees can also take part in themed events such as a "Slimer" demonstration, trivia and more at Wizard World's eighth annual trip to Columbus.

"Wizard World is proud to team with Sony Pictures and Ghost Corps to celebrate the anniversary of a film which has been the source of enjoyment for so many of our fans over the years," said John D. Maatta, Wizard World CEO. "We are honored that these keepers of the Ghostbusters legacy have entrusted us with producing the high-quality events that we are known for, and are pleased to continue our IP collaboration with Sony Pictures in such a significant way. Sony Pictures continues to be creative and innovative in all of our dealing with them."

"Ghostbusters continues to have a strong fanbase across the world and we are pleased to celebrate the 35th anniversary with a collaboration with Wizard World," added Jeffrey Godsick, Executive Vice President, Brand Strategy and Global Partnerships for Sony Pictures. "We know they will create great experiences at all of their conventions, and they are pulling out all the stops in creating the ultimate fan experience for the Ghostbusters Fan Fest next year."

Over the next year, Wizard World will present a touring experience at Wizard World Comic Con events throughout the country featuring a pop-up shop with exclusive Ghostbusters merchandise. Next year, following the Ghostbusters Fan Fest Event, Wizard World will continue to tour the additional elements debuted for the 35th anniversary celebration. Details will be linked at www.wizardword.com.

Fans can learn more about the Ghostbusters Fan Fest presented by Wizard World starting tomorrow at www.ghostbusters.com.

In Stores and Online Now: Ghostbusters Ectomobile Owner's Workshop Manual

Now available wherever fine books are sold, the Ghostbusters: Ectomobile - Owner's Workshop Manual! This book goes far beyond just telling you tire pressure and oil change schedule. Learn how to properly operate a standard-issue Ghost Trap. Be kind to your fellow co-workers and finish the Containment Unit procedures to the final step. Learn how and why a Proton Pack uses ions to exhausted and ensnare the supernatural. All that plus do's and don'ts for uniforms and a whole lot more! No Ghostbuster should ever leave home without this handy reference guide - available for purchase on Amazon, at your local Barnes & Noble, the famous Ray's Occult in Manhattan, or wherever fine purveyors of supernatural manuscripts are sold!

The Game We Received, Not Necessarily the Game We Deserved

There's a line in Kids in the Hall's Brain Candy, where the pharmaceutical company is so desperate to find their next hit product after the massive success of the drug "Stummies," and a character begins a pitch by saying, "Well, it's a lot like Stummies..." 

I can only imagine that the pitch meeting for Ghostbusters: Puzzle Fighter started out very similarly. Someone in the room posited, "Well, it's a lot like Bejeweled," and the rest was history.

First, I should mention that the intention of Ghostbusters HQ is not to become a review site. I'm sure there are plenty of people out there with differing opinions than mine who will enjoy things that I don't, so I don't want to get into the business of throwing up reviews and opinions that might sway someone away from something they like. I also hate bad reviews, which as I started playing, I knew this would come off as. But a representative of the Ghostbusters: Puzzle Fighter PR team reached out to me and offered me a review copy of the game and I figured, what the heck - I had zero interest in the game before but since they're sending it my way, I'll give it a chance.

After downloading from the App Store, you're greeted with an incredibly lengthy loading screen that looks a lot like this. Those of the old guard that once played David Crane's Ghostbusters will understand this but this load screen stays up a good ten times longer than the Commodore 64 took to load that game in the mid-1980s. It could have been a result of getting a preview of the game and the servers weren't ready for it, or there was a giant update to the game needed that wasn't in what was downloaded through the App Store, but I gave it a good five minutes before putting the phone to sleep and moving on.

I came back to the phone later in the work day to find that whatever the game had needed to download had completed, but was a little surprised at how simplistic the game was given the lengthy load time on the front-end. What about this game could have possibly taken that long to load? As mentioned, it's essentially a skinned version of Bejeweled with a "RPG" element placed on top of it without much motivation. There's also a story but the writing and voices of the characters are so out of tone that I ended up reading the first couple static screens and skipping past them from that point forward. Janine reads like a strange character from the Nicolas Cage Valley Girl, turning uncharacteristic phrases like, "Shake your tush, bozo." Venkman comes off like a frat boy creep, and everything just feels... off. Between the strange stilted writing and the odd character design (that initially faced a lot of criticism because of how crazy hyper-sexualized it was after the initial announcement of the game), it really reminds you how difficult the tone of this franchise is to perfectly capture.

Once I was finally into the gameplay, it's identical to the current trend of Candy Crush and Dots mobile games where you're swiping to match consecutive colors/jewels in order to eliminate them from the board. If you've played one of those puzzle games since 2001, you've played Ghostbusters: Puzzle Fighter. The only somewhat new mechanic is the battle aspect of it all. You take a turn, then the AI opponent takes a stab, and so on while you "fight" your opponent draining XP with every eliminated set of jewels.

The Ghostbusters aspect of the game is really just the skin as you amass player cards and characters from the Ghostbusters franchise to do battle with you and you choose your team going into it. This aspect has been sold as a "card game" akin to Magic: The Gathering but because of the gameplay mechanics, it falls flat. Even if I received a super-awesome character card and decide to play it in the next round, I'm still swiping to connect three or more identical tokens. Essentially it feels a lot like one of those puzzle games you got as a party favor at your best friends' birthday where you need to put the marbles into the divots in the playing field: the cardboard background has Ghostbusters on it, but the game pretty much has nothing to do with Ghostbusters at all. Maybe the card game aspect should have been the actual game mechanic and the antiquated 15-year old feeling Bejeweled clone could have been jettisoned, and it would have made it feel more compelling to me? I'm not entirely sure what could have kept me interested, to be completely honest.

All-in-all, I probably played three rounds of the game and felt finished with it. Total time playing the game maybe five or ten minutes. Which I believe is the purpose. It's a quick distraction while you're waiting in a lobby or sitting at the airport that you don't have to think that much about. The good news is that it's free, it most likely relies on in-game purchases for additional levels, characters, etc. but I never even got to that part of the game and probably won't. 

Hopefully this is just a place-holder for Capcom/Beeline to maintain the license until they unveil something more elaborate up their sleeves. A quick skin of an existing product to keep the brand awareness up while they work on a more complex and actually Ghostbusters-related title. I hate to be so down on it, I'm sure a lot of folks worked incredibly hard on it and worse had to scramble and redesign several aspects of the game at the last-minute. Just not really my cup of tea. I'm sure others will kick a kick out of it.

A Collection of News Spores for July 9

The past two weeks have been a flurry of Ghostbusters-related activity between Ghostbusters (2016) production occurring on the east coast, and the San Diego Comic-Con happening on the west coast. GBHQ isn't a breaking news kind of place but there's so much going on we wanted to present a "collection of spores" all in one space to get you up to speed...

"MOICHINDISING!"

(Photo courtesy of the Ghostbusters of Southern California)

Preview Night at San Diego Comic-Con 2015 kicked off the week's festivities yesterday and many of the key Ghostbusters licensors had their goods already out on display. The Ghostbusters of Southern California were on the scene to snap some photos of the upcoming Diamond Select line-up of action figures as well as a mystery glass case at the Mattel booth that eventually contained one of the Ghostbusters (2016) proton pack props from production (and presumably, will also contain more goods following the licensing presentation on Friday).

1:4 THE HERO

Hollywood Collectables Group has been working on Ghostbusters-related merchandise behind the scenes for the better part of the year (or longer), some people speculated that a 1:1 prop or two might be in the works. But it was revealed that they are going to unveil their 1:4 scaled Peter Venkman statue at this week's San Diego Comic-Con. They took to Facebook to give us a little sneak peek of the figure and the crazy amount of detail that will be put into each and every statue. Can't wait to see the full reveal.

SAVING THE DAY

Now here's something you don't see every day. According to Boston news outlet WHIDH, there was an altercation between two local Bostonians near the Chinatown filming location of Ghostbusters (2016). An elderly woman was assaulted and the production crew aided the Boston Police in their investigation. On an unfortunate note, WHIDH says the 72-year old woman is not expected to survive.